Adhesive for paper

首页 > Products > Adhesive for paper
Dissolving quickly in cold water within 2-3 mintus wallpaper adhesive glue powder

Description

  • Dissolving quickly in cold water within 2-3 mintus wallpaper adhesive glue powder
  • Price:1.6$/kg
  • Categories:Adhesive for paper
  • Views:

Product Details

1 Performance
It has strong paste, non-toxic, until- mildew, made of potato starch, environment friendly product.Can easy mixing and quick dissolve in cold water, suitable for various different kinds of wallpaper.such as common wallpaper,PVC wallpaper,non-woven wallpaper, glass fiber wall covering, weaving wallpaper, thick and heavy wallpaper and metal wallpaper etc.


2 process parameter
Item
Index
Appearance
White powder
Solid content
98%
Viscosity
20000 -35000mPa.s(glue powder:water=1:30)
The ratio of glue with water

1:30


PH value

9-11


Glue-spread


1kg glue powder can coat 110-140 m2 wallpaper
Curing time
8h
Peel strength
120Mpa
Shelf life
24 months
Packing
20kg per bag/180g per box/120g per box

3 Application
Mix the adhesive powder and water at the ratio of 1:30. Stir to achieve a smooth consistency. Leave mixed product for approximately 5 minutes. After that, stir it again and it is ready-to-use.
Apply the adhesive to the wallpaper, follow wallpaper's instructions. Starting from the top, roll paper in place, taking care to roll out air bubbles. Immediately remove excess adhesive and any adhesive on pattern side with damp cloth.
After dissolving adhesive may be stored for 3 days in closed bucket. Stir very well before use when was stored more than 1 day.


4 Usage 
It requires wall neat clean, dry, no solid, no hole, strong and no dust. First put the powder into percent clean water, churn half minute make sure the powder completely absorb, after three minute then churn. Use the brush to paste mixed glue on finished cutting wallpaper, full of the surrounding, fold and stress two sides five or six minutes so that the paste completely infiltrate the back of paper then it can paste on wall. First should put the wallpaper's top, use drawknife from up and down, from middle to two sides extrude air bubble. Use wet towel take the extra paste out of the surface wallpaper. 

5 Applying paste:
Brush the paste on the back of the wallpaper.Be sure to cover the entire back of the paper including all edges.Let it sit for 5-6 minutes so that it is absorbed by the paper,then apply the paper to the wall.



Powered by ZZZcms